Customized large round tube cold bending equipment needs attentionhow to use

——

Print       Small   Middle   Big

Profile rounding machine is a high-quality, high-efficiency winding circle of carbon steel, stainless steel and non-ferrous metal profiles {angle steel, strip steel, channel steel, pipe, etc.) made into rings and flanges with diameter φ320-φ6000mm. Device. The profile rounding machine has a unique structure, small volume, low energy consumption, high efficiency, no noise and long service life. The profile rolling machine is easy to install and use, has simple operation, strong carrying capacity, fast winding speed and reliable product quality. The method of using the profile rounding machine for flange cold bending is as follows: the thickness of the flange to be machined, the width of the rounding machine and the forming diameter must be within the allowable range of the equipment load, and must not exceed the upper limit of the equipment. Generally, the flange is processed at normal temperature, and the width and thickness of the flat steel should be 5:1, so that the flatness and roundness of the flange are greatly improved. The profile rolling machine must be refueled before use. The gear part needs to be filled with ordinary lithium base grease for about 20 days.

Working principle of round tube cold bending equipment: When working, the required cold-formed steel is pushed between the two active rollers by the auxiliary system door bracket, and the hydraulic system is started to make the hydraulic cylinder push the dovetail groove and the cold bending roller to cool. Pressing the steel, close the hydraulic system when the arc required by the design is reached, start the mechanical transmission system, make the active roller rotate and rely on the friction to drive the steel to move smoothly and slowly, thus achieving continuous cold bending operation. At the end of the cold bend, the mechanical drive system is closed and the hydraulic system is activated to retract the hydraulic cylinder. Place the cold-formed steel on the door bracket of the auxiliary system. This cold bending operation ensures the strength of the material, improves the quality of the supporting steel arch, greatly improves the work efficiency, and the operation is simple and clear. The cold bending machine has good working performance compared with the press.

777.jpg

Matters needing attention during the use of the mesh welding machine: 1. Do not move the gear, transmission sheave, sprocket, belt, chain, straightening machine, induction body, close to any part of the body or any object. Switches and conductors with dangerous voltages in electrical cabinets, transformers, etc. 2. Do not place the handle or object near the upper electrode that is being pressurized or placed between the upper and lower electrodes. 3. Do not remove or break the zero (grounding) safety protection line on the main unit and the electric control cabinet. Check the zero (grounding) safety protection line regularly. 4. When there is a fuse in the electric control cabinet, stop the power failure first. After the electrician finds the cause of the fuse, replace it with the fuse of the same type and specification, otherwise it will cause fire and burn the device. 5, the operator should always pay attention to see, listen, smell, early detection of accidents and equipment hidden dangers, when an abnormal phenomenon is found, should immediately stop power failure for inspection.

888.jpg


Tags: Use of cold bending machine  Industry  
On ADevelopment status of automatic cold-formed steel machine industry
NextOverview of the development of gear box cold-formed steel equipment industry

Use of cold bending machine  Industry  Related Content

——

24

2018-07

Customized large rou…

Due to the high price of the cold bending machine, it is necessary to know how to use it in advance to ensure the life of the cold bending m…… [Know More]

24

2018-07

Development status o…

[Know More]

CommentsCOMMENT

——

User Name Name
Comments Comment

ProductsFOCUS ON WEB DESIGN BRAND POSITIONING HELP YOU REALIZE THE VALUE OF INTERNET BRAND

PRODUCE THE BEST MACHINE FOR THE WORLD

——

Our company's diversified products, all kinds of cold bending machinery, we mainly operate: Roof…

Learn more